View B39881B8652P810_8420714.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer cellular / wcdma band v series/type: ordering code: b8652 B39881B8652P810 date: version: september 12, 2014 2.0 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n multimode saw duplexer for mobile telephone cellular / wcdma band v systems n low insertion attenuation n low amplitude ripple features n package size 1.8 x 1.4 mm 2 n package height 0.475 mm n rohs compatible n approx. weight 0.0042g n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.475 max. 0.7 pin configuration n 1 tx input n 3 rx output n 6 antenna n 2, 4, 5, 7,8 to be grounded
3 september 12, 2014 b8652 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +90?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characterisitcs tx - ant min. typ. @ 25 ?c max. center frequency f c 836.5 mhz maximum insertion attenuation a max 824.0 ... 849.0 mhz 1.4 1.9 db 824.59... 848.41mhz 1.3 1.7 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 1.3 1.5 db amplitude ripple (p-p) da 824.0 ... 849.0 mhz 0.5 1.1 db @f carrier 826.4 ... 846.6 mhz da wcdma 3) 0.5 0.9 db amplitude ripple over any 5mhz channel da ch 824.0 ... 849.0 mhz 0.4 1.0 db error vector magnitude @f carrier 826.4 ... 846.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.6 2.5 % input vswr (tx port) 824.0 ... 849.0 mhz 1.6 2.0 output vswr (ant port) 824.0 ... 849.0 mhz 1.6 2.0
4 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characterisitcs tx - ant min. typ. @ 25 ?c max. absolute attenuation a 10.0 ... 420.0 mhz 35 43 db 420.0 ... 494.0 mhz 35 40 db 494.0 ... 701.0 mhz 32 35 db 701.0 ... 728.0 mhz 32 35 db 728.0 ... 764.0 mhz 32 35 db 764.0 ... 804.0 mhz 30 37 db 860.0 ... 864.0 mhz 3 10 db 864.0 ... 869.0 mhz 14 24 db 869.0 ... 894.0 mhz 44 50 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 45 52 db 1559.0 ... 1563.0 mhz 39 42 db 1565.420 ... 1573.374 mhz 39 42 db 1573.374 ... 1577.466 mhz 39 42 db 1577.466 ... 1585.420 mhz 39 42 db 1597.5515 ... 1605.886 mhz 39 43 db 1638.0 ... 1708.0 mhz 39 42 db 1844.9 ... 1879.9 mhz 40 47 db 1884.5 ... 1919.6 mhz 40 49 db 1930.0 ... 1990.0 mhz 44 49 db 2110.0 ... 2170.0 mhz 44 47 db 2400.0 ... 2547.0 mhz 36 39 db 3286.0 ... 3406.0 mhz 30 35 db 4110.0 ... 4255.0 mhz 20 35 db 4900.0 ... 5950.0 mhz 24 30 db
5 september 12, 2014 b8652 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +90?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characterisitcs ant - rx min. typ. @ 25 ?c max. center frequency f c 881.5 mhz maximum insertion attenuation a max 869.0 ... 894.0 mhz 1.5 2.0 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 1.4 1.8 db amplitude ripple (p-p) da 869.0 ... 894.0 mhz 0.3 0.9 db @f carrier 871.4 ... 891.6 mhz da wcdma 3) 0.2 0.6 db amplitude ripple over any 5mhz channel da ch 869.0 ... 894.0 mhz 0.5 0.8 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. @f carrier 871.4 ... 891.6 mhz 1.5 2.5 % input vswr (ant port) 869.0 ... 894.0 mhz 1.6 2.0 output vswr (rx port) 869.0 ... 894.0 mhz 1.6 2.0 imd product level limits 3) 3) imd product level limits for power levels p tx =21.5 dbm (antenna port output power) and p blocker =-15dbm (antenna port input power). at f tx =836.5mhz, f rx =881.5mhz blocker 1 45.0 mhz -128 -109 dbm blocker 2 791.5 mhz -106 -96 dbm blocker 3 1718.0 mhz -104 -94 dbm blocker 4 2554.5 mhz -110 -100 dbm
6 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characterisitcs ant - rx min. typ. @ 25 ?c max. attenuation a 10.0 ... 477.0 mhz 50 65 db 45.0 mhz 50 100 db 477.0 ... 824.0 mhz 50 59 db 779.0 ... 804.0 mhz 50 68 db 824.0 ... 849.0 mhz 45 60 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 51 61 db 849.0 ... 854.0 mhz 30 34 db 909.0 ... 920.0 mhz 10 18 db 920.0 ... 979.0 mhz 25 29 db 979.0 ... 1710.0 mhz 45 51 db 1693.0 ... 1743.0 mhz 45 53 db 1710.0 ... 1785.0 mhz 50 53 db 1785.0 ... 1788.0 mhz 45 53 db 1850.0 ... 1920.0 mhz 45 52 db 1920.0 ... 1980.0 mhz 45 52 db 1980.0 ... 2400.0 mhz 40 49 db 2400.0 ... 2500.0 mhz 40 49 db 2517.0 ... 2592.0 mhz 40 47 db 2607.0 ... 2682.0 mhz 40 48 db 3476.0 ... 3576.0 mhz 40 47 db 4345.0 ... 4470.0 mhz 40 49 db 4900.0 ... 5950.0 mhz 40 52 db 5214.0 ... 5364.0 mhz 40 57 db
7 september 12, 2014 b8652 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +90 ?c antenna terminating impedance: z ant = 50 w ll 8.2 nh rx terminating impedance: z rx = 50 w tx terminating impedance: z tx = 50 w characterisitcs tx - rx min. typ. @ 25 ?c max. isolation a 824.0 ... 849.0 mhz 55 60 db 824.59... 848.41mhz 57 60 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (powertransferfunction). please refer to annotation on page (8). 57 63 db 869.0 ... 894.0 mhz 52 54 db @f carrier 871.4 ... 891.6 mhz a wcdma 3) 52 55 db 1574.0 ... 1577.0 mhz 40 59 db 1638.0 ... 1708.0 mhz 20 58 db 2462.0 ... 2557.0 mhz 20 53 db
8 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics section attenuation of wcdma signal (powertransferfunction, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 5-passband, f carrier ranges from 826.4mhz (lowest tx channel) to 846.6 mhz (highest tx channel)). h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 1) 1) 168h damp heat steady state acc. to iec 60068-2-67 cy v esd voltage v esd 100 2) 2) acc. to jesd22-a115b (mm - machine model), 10 negative and 10 positive pulses. v machine model input power p in source and load impedance 50 w 824.0 ... 849.0 mhz elsewhere 29 10 dbm dbm continuous wave t = 50?c, 3000 h s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd h rrc f ( ) 2 f 1 = d }
9 september 12, 2014 b8652 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (power transfer function) frequency response rx-ant (power transfer function)
10 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-ant (power transfer function) frequency response tx-ant (wideband)
11 september 12, 2014 b8652 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response rx-ant (power transfer function) frequency response rx-ant (wideband)
12 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx (power transfer function) frequency response tx-rx (wideband)
13 september 12, 2014 b8652 836.5 / 881.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. return loss s 11 tx- port s 22 ant-port s 33 rx-port
14 september 12, 2014 b8652 836.5 / 881.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8652 ordering code B39881B8652P810 marking and package c61157-a8-a68 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8652_nb_un.s3p, b8652_wb_un.s3p see file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
15 september 12, 2014 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39881B8652P810

	To Download B39881B8652P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .